Rebreathers & Accessories
from DiveLife

ADV Diaphragm Locking Ring Tool...

APD ADV service kit....

RB70 - Automatic Diluent Valve Fitted in place of the inhale T-piece - the ADV supplies gas to the breathing circuit whenever a substantial negative pressure is experienced within the inhale counterlung or when manually operated by pressing the diaphragm cover. The gas supply hose connects with a 3/...

Buddy Inspiration Classic Rebreather. Comes with harness, 16kg wing and auto-air. RRP £3955...

Canister o-rings for lid and cartridge to fit Evolution rebreather...

Complete with EV92/1 Case Plate, EV92/2 Cylinder Bracket and EV92/3 Cylinder Bands The nuts &; bolts to attach the Case Plate to the Evolution are included...

One magnet for the inspiration handset....

AP Diving Inspiration counterlungs. Comes with blanking plates fitted. O2 and diluent inflators can be purchased seperately...

Inspiration Harness...

AP Diving inspiration mouthpiece...

Scrubber monitor for the Inspiration Vision Electronics. Just plugs into the head and replaces scrubber column...

We are delighted to announce that the Open Circuit Bailout Mouthpiece, the OCB, is now available. This highly sought after product will enable the diver to bail out to open circuit with one movement without removing the mouthpiece from their mouth, very easy in a stressful situation and will provide...

O-ring kit for Inspiration or Evolution mouthpiece...

Mouthpiece service kit including all o-rings and non-return valves for Inspiration and Evolution rebreathers...

O-ring kit to service the O2 inflator on the Inspiration and Evolution rebreathers...

O-ring service kit for diluent inflator on the Inspiration or Evolution rebreather...

Canister o-rings for lid and cartrisge on Inspiration rebreather...

Scrim kit for Inspiration or Evolution rebreather...

Set of o-rings for the convoluted hoses on the Inspiration or Evolution rebreather...

Oxygen cell for Vision electronics with coaxial fitting. Currently awaiting stock due mid May...

10" hose connecting the EVOLUTION manifold to the ADV...

15" hose connecting the INSPIRATION to the ADV...

Ideal for disinfecting rebreather counterlungs, valves and hoses Effective against bacteria, viruses and fungi- including Hepatitis, Herpes, Influenza, Weil’s disease, and Legionella. No significant hazard if inhaled or swallowed. Caution: rinse out thoroughly with fresh water before diving an...

Scrubber Monitor for the Evolution Rebreather...

V92/1 Case Plate The nuts &; bolts to attach the Case Plate to the Evolution are includedFor use with the EV92/2 and EV92/3 Cylinder Bracket and Bands...

EV92/2 - Cylinder BracketFor use with EV92/3 Cylinder Bands and EV92/1 Case Plate...

GC2/24" Hose with Male end of the GCS and standard 2nd stage end to fit the ADV Consists of a 24" AP300 regulator hose with the male half of the GCS (connects with the female snap connector of GC1/24) on one end and a standard (9/16" UNF female) 2nd stage connector end on the other. This can be conn...

GCS100 - Gas Connector System 100 The heart of the Gas Connector System consists of 2 quick release hose fittings, one male and one female. The hose with the male fitting connects to your ADV or a 2nd stage and the female connects to the intermediate (low) pressure port of your first stage. When the...

GCS100A - Gas Connector System 100A The heart of the Gas Connector System consists of 2 quick release hose fittings, one male and one female. The hose with the male fitting connects to your ADV or a 2nd stage and the female connects to the intermediate (low) pressure port of your first stage. When t...

GCS101 Gas Connector System 101 Includes: 1 x GC3 FLOWSTOP 1 x GC1/24 - 24" hose - female snap connector and 1st stage end 1 x GC2/24 - 24" hose - male connector and ADV end All hoses can be shortened by unscrewing the reusable end fittings and cutting the hose to the required length. The ends can t...

GCS101A Gas Connector System 101A Includes: 1 x GC1/24 - 24" hose - female snap connector and 1st stage end 1 x GC2/24 - 24" hose - male connector and ADV end All hoses can be shortened by unscrewing the reusable end fittings and cutting the hose to the required length. The ends can then be screwed ...

APD Lift bag cylinder service kit...

RB13D - Service Kit for RB13 M25 Pillar Valve NOTE: NOT OXYGEN CLEANAll APD Service Kits are oxygen compatible, that is, the materials used are compatible with being O2 cleaned KITS MUST BE OXYGEN-CLEANED BY THE SERVICER / DIVER BEFORE USE...

ADV Tilt Valve Boss Tool...

A pair of neoprene covers to cover and protect you loop of your rebreather....

A pouch designed to hold and protect the handset whilst carrying the rebreather. Aims to prevent damage to your handset, and make carrying the rebreather a whole lot easier - stops things hanging and dragging along the floor. Made from high quality neoprene, with a clip on the top, this pouch can be...

Battery for the Megalodon rebreather...

Lift bar for Megalodon rebreather. RRP £65...

  NEW REBREATHER MULTI-FUNCTIONAL FRAME NEW REBREATHER MULTI-FUNCTIONAL FRAME The new Rebreather frame from Custom Divers will fit all Inspirations, Evolution, Megalodon and most other rebreathers.  More information will follow soon. ...

Ambient Pressure Diving Evolution renbreather. Comes with either a BCD or wing style jacket. Also included are the auto-air, vision electronics, HUD and PC download and log viewer.RP £4695...

The Prism 2 is a sophisticated electronic Closed Circuit Rebreather providing divers a proven platform to explore the underwater world. Researchers, biologists, photographers, explorers, and wildlife lovers have utilized rebreather technology for decades to expand range, time, and to observe marine ...

Oxygen cell for the Inspiration rebreather...

Ambient Pressure Diving Inspiration with Vision Electronics. Comes complete with 16kg wing, harness, auto-air, Vision electronics with HUD and the PC download and log viewer software.RRP £4695...

Molecular Products 797 grade sofnolime. 20kg...

Having been reserved for deep diving enthusiasts and military divers in the past Poseidon is now bringing Rebreathers to the sports diving market. With the fully automatic Mk VI Discovery you will experience a new way of diving, safe, quiet and almost as long as you want. The advanced control system...

We are an Authorized Dealer for the Sentinel CCR. Sentinel RebreatherThe Sentinel is an electronics-driven fully closed circuit constant PO2 design rebreather (eCCR) that provides an intelligent and easy to use life-support system (LSS). Manufactured in the United Kingdom (UK) by VR Technology Ltd, ...

Upgrade you Vision electronics with Nitrox decompession software...

Trimix software upgrade from Nitrox for your Vision Electronics...

Trimix Decompression software for the Vision electronics...