DiveRite
Dive Rite was established in 1984 by Lamar Hires and Mark Leonard; two underwater cave explorers and cave diving instructors from North Florida. In the 1970's and early 80's, technical diving gear was virtually non-existent. Most cave divers made their own gear or adapted ocean diving gear to fit the cave environment. Lamar and Mark changed that and began the first technical dive gear company in existence. Pioneering products such as the Classic wing and the canister light, they introduced to the scuba industry the very first products designed for underwater exploration. In 1991, Dive Rite became the first manufacturer to launch a Nitrox-compatible computer called the "Bridge." In 1996, Dive Rite revolutionized the dive industry with the launch of the TransPac harness. Since those early days, Dive Rite has grown from thirteen products to over three hundred products. In 1997 Lamar Hires bought the company and has grown the company from a fledgling, North Florida dive gear company to a worldwide dive equipment manufacturer with distribution in 23 countries all over the world. Twenty years after the first primary dive reel was sold, Dive Rite's pioneering spirit continues with the innovation and quality that goes into each and every product. Dive Rite has a proud history of supporting dive exploration, conservation and education, putting Dive Rite in the unique position as a leader in the worldwide technical diving marketplace.
Backplate Lumbar Comfort Pad Add this Lumbar pad to any metal backplate. It alleviates pokes & prods into the soft area of the back and protects the exposure suit from possible snags....
Dive Rite Crotch Straps 1" Webbing w/ slide releasebuckle & scooter ring...
Dive Rite 16lb Weight Pocket System Tall and narrow, these weight pockets leave plenty of room on the waist belt for other accessories. This set of right and left hand pockets include a pocket insert that holds the lead and a separate weight pocket holster. Set at an angle so divers can easily slip ...
Dive Rite 32lb Weight Pocket System Hefty weight pockets hold plenty of weight for cold water divers. This set of right and left hand pockets include a pocket insert that holds the lead and a separate weight pocket holster. Set at an angle so divers can easily slip the pocket into the holster with o...
Dive Rite 45kg/100lb Lift Bag The bag has an integral dump valve, accessed by a convenient pull cord, that can be used to control ascent rate. The Dive Rite high-lift Bag is 28-inches tall by 28-inches wide (at it's widest point) and has a handle at the top and reflective tape on both sides. Comes w...
Dive Rite Aluminum Backplate Black, anodized 5052 Aluminium resists corrosion and abrasion. Highly polished with rounded upper corners to prevent abrasion to wing. 1” & 2” slots permit diver's choice of crotch straps. All edges are deburred to eliminate sharp edges & prevent abra...
For divers who use argon gas for drysuit inflation or carry a small bottle of spare air, our Argon Bottle Mount carries one 6-cubic foot or one 13-cubic foot tank. Designed to attach along 1-inch (2.54 cm) D-rings of the TransPac backplate or along perimeter holes of aluminium or steel backplates, t...
Dive Rite Basic Harness (made of a single piece of continuous webbing)Backplate not includedWeight: 1.2lbs/0.53kg...
Dive Rite Bellows Horizontal Pocket w/Daisy Chain Internal depth expands from 0.5” to 2.5”6”x10”x2.5” Weight: 4 oz/113 grams...
Dive Rite Bellows Velcro Pocket w/Daisy Chain Internal depth expands from 0.5” to 2.5”10”x6”x2.5”Weight: 4.4 oz/125 grams ...
Dive Rite Bellows Zip Pocket w/Daisy Chain Internal depth expands from 0.5” to 2.5”10”x6”x2.5”Weight: 3.8 oz/108 grams...
Dive Rite Buttplate & Bungees Transforms a harness and wing into a rig capable of sidemounting tanks. The Nomad buttplate weaves through standard 2" harness webbing on the waist strap and is locked tight into place using stainless steel TransPac assembly screws through slots on the backplate. On...
Dive Rite Cam Strap Double Length w/ S/S BuckleWeight 0.75lbs/340g....
Dive Rite Clipper Pocket 1680 denier ballistic nylon fabric is tear & abrasion resistant. Two-inch nylon webbing loops on the back of the pocket slide over a standard 2” webbing waist strap and secure the pocket into place. Heavy duty Velcro secures pocket flap and resists sagging and stre...
Dive Rite Cold Water Z-Knife with Daisy Chain Clip 440 grade stainless steel knife blade can be replaced with any utility knife blade.Annex clips can be removed and sheath worn on waist belt, if preferred.Quick-release velcro lanyard keeps Z-knife securely inside the pocket.Nylon webbing pouch. Pouc...
Dive Rite Crotch Straps 2" Webbing w/scooter ring 2" Webbing w/scooter ring Includes a neoprene sleeve to protect exposure suit from abrasion. Requires the crotch strap adaptor when wearing a TransPac harness....
Dive Rite Delayed Surface Marker Buoy Rebreather divers and open circuit divers alike will appreciate our hybrid Surface Marker Tube. An oral/power inflator makes inflation simple for rebreather divers who do not have easy access to a regulator for inflation. Likewise, a funnel-shaped, anti-spill ba...
Deluxe Harness (incorporates a chest strap & shoulder strap pivot rings)Backplate not includedWeight: 1.8lbs/0.70kg...
Our Drysuit Inflation Regulator is a compact first stage regulator that can be used on any 200 BAR DIN valve. Measuring only 2 3/8-inches (6 cm) tall, this is the most compact suit inflation regulator available. It has an unbalanced piston first stage with an intermediate pressure of 120 psi and inc...
Dive Rite Executive Slate 6 Leaf erasable slate pages. Graphite stick pencil included 13 x 10cm....
Dive Rite Finger Reel - Large 38m/125ftWith S/S Double Eye Bolt....
Dive Rite Finger Reel - Small 15m/50ftWith S/S Double eye Bolt....
Dive Rite Drysuit Accessories Dive Rite Gaiters Set...
Dive Rite Jon Line Contains 6ft of 1" webbing with a stainlesssteel carabineer which fits into a smallpouch with a 2" belt loop....
Dive Rite Jon/Garvin Line Contains 6ft of nylon line with a hand loop at one end & a Garvin hook at the other. The Jon Line is stowed using an elastic loop & pull tab, making one handed deployment simple....
Dive Rite Jump/Gap Reel 15m/50ft.With S/S Double Eye Bolt...
Dive Rite Line Arrows Available in Red,White,Blue or Yellow...
Dive Rite Line Cookie Non Directional MarkerAvailable in Yellow or White...
Dive Rite Nitek X Computer A mixed gas computer with full decompression capabilities that monitors up to seven different gas mixes. Uses a modified Buhlmann ZH-L16 algorithm with 100/100, 40/100 and 30/75 gradient factors. Optional custom gradient feature is available as an upgrade. Real time decomp...
Dive Rite Nomad Wing Designed specifically to be worn underneath a TransPac harness, the Nomad wing provides excellent streamlining by integrating the harness through wing keepers that hold the wing low across the divers back and reduces drag. Velcro strips along the centre panel allow for the addit...
Dive Rite Notebook Cover Organiser w/ Dive wRites It is a tri-fold wallet that closes with Velcro. Made of ballistic nylon, it has storage for three pen/pencils with elastic keepers and has pockets in the back flap for storing C-cards, insurance card or any other similar sized items. The Notebook co...
Dive Rite O2 Second Stage Pocket 1680 denier ballistic nylon fabric is tear & abrasion resistant. Stainless steel, 1” D-ring on the back of the pocket is used to clip into an oxygen deco bottle stage strap.Two-inch nylon webbing loops on the back of the pocket slide over a standard 2&rdquo...
.jpg "Dive Rite Primary Reel (cavern)")
Dive Rite Primary Reel (cavern) 122m/400ft.With S/S Bolt Snap....
Dive Rite Q/R Deluxe Harness System (same as BC1080 but with a quick release buckle on the shoulder)Backplate not includedWeight: 1.10lbs/0.76kg...
A critical accessory for any drysuit diver, the Balanced Relief Valve supports a well-hydrated diver, especially on long dives. Without a relief valve, divers tend to intentionally dehydrated themselves to avoid the "urge" during an extended bottom time dive. Hydration is critical to avoid decompres...
.jpg "Dive Rite Safety Reel (cavern)")
Dive Rite Safety Reel (cavern) 43m/140ft.With S/S Bolt Snap....
Dive Rite See Me Marker This sealed tube is orally inflated on the surface & can be raised high out the water to further increase visibility. An attached sleeve is used to insert a cyalume stick for increased visibility in low light conditions.At 44” long & 4” wide, it secures ea...
Dive Rite Sidewinder Cave Reel 122m/400ft.With S/S Double Eye Bolt....
Dive Rite Sidewinder Cave Reel 274m/900ft.With S/S Double Eye Bolt....
Dive Rite Single Tank Adaptor (singles mounting plate)For divers who frequently switch between double tank and single tank rigs, our single tank adapter is a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Constructed of marine grade 304 stainless st...
Dive Rite Stabilising Plates The stainless steel stabilising plates are required to secure the TransPac harness firmly to any set of doubles that uses industry standard bands and bolts....
Dive Rite Stage Strap w/ Stainless Steel Butterfly Bolts...
Dive Rite Stage Strap Kit With Stainless Steel Butterfly Bolts. Resistant to breakage, rot and splitting, nylon webbing creates a durable and longlasting foundation for stage rigging, yet can be cut free in case of entanglement. Rugged elastic hose retainer band resists rolling and tearing. A large ...
Dive Rite Stainless Steel Backplate Grade 304, passivated, stainless steel plate resists corrosion and oxidation. Bevelled to eliminate sharp edges andprevent abrasion to harness webbing. 11” on centre holes accommodate standard bolt kitsTwo 3/8 slots along the bottom are designed to fit assem...
Dive Rite Stainless Steel Belt Buckle...
Dive Rite Surface Marker Buoy - 100lb When considerable lift is needed, the Surface Marker Buoy is the deco bag of choice. With 100 lbs of lift, the Surface Marker Buoy can be inflated at depth for decompression or inflated at the surface as a float ball. At 3-feet tall by 24-inches wide, the Surfac...
Dive Rite Thigh Pocket w/Daisy Chain Proprietary fabric leg band is 4” in width with silicone strips that grip the exposure suit and prevent slippingInternal depth expands from 0.5” to 2.5”10”x6”x2”Weight: 7.2 oz/204 grams...
.jpg "Dive Rite TransPlate Harness")
Dive Rite TransPlate (backplate not included) The TransPlate is an innovative harness designed specifically for hard back plates. The TransPlate harness utilises many features & benefits of the Transpac harness for divers who demand comfort & the perfect fit when using a stainless steel or a...
Dive Rite Trauma Shears - Daisy Chain Clip Titanium coated, 440 grade stainless steel bladeAnnex clips can be removed and sheath worn on waist belt, if preferred.Quick-release velcro lanyard keeps shears securely inside the pocket.Nylon webbing pouch Pouch is 7”x2”Shears are 8”3.8o...
Dive Rite wRites Waterproof Notebook 45 erasable pages Graphite stick pencil included 12 x 17cm....
The Rec EXP is the flagship of our innovative line of 360 degree, donut-style wings. Donut wings tend to provide greater stability and control in the water, improving diver buoyancy and trim. The Rec EXP is shorter than our traditional Rec wing, which means it now fits a wider range of diver stature...
The TransPac is the most innovative and versatile diving harness on the market. It is designed and tested to meet the most rugged diving conditions from shallow reefs to deep wrecks and caves. It is the only BC harness that can be readily switched from single tanks to doubles, plus side-mounted tank...
The Travel EXP is part of our innovative line of 360 degree, donut-style wings that provide greater stability and control in the water. Now made of tough, 1680 ballistic nylon with a new oval shape, the Travel EXP is a lightweight, small-profile wing that is great for travel and warm-water, single t...
Our Venture Wing has always been a donut-style wing and with the debut of our EXP wings, it has been renamed to reflect its design. Ideal for diving heavier single tanks with a hard backplate, the Venture Wing has 45 pounds/20 kgs of lift and can accommodate up to one 95 ft3/15 L single tank. The t...
 for shoulder straps.jpg "Neoprene Sleeves (1pair) for shoulder straps")
Neoprene Sleeves (1pair) for shoulder straps (1pair)for shoulder straps...
Tel: 0161 796 0300 Fax: 0161 796 0500
www.divelife.co.uk | info@divelife.co.uk
Company Number: 06097876 | VAT No: GB 873 9895 46
Copyright © 2001-2010 DiveLife | All Rights Reserved
www.divelife.co.uk | info@divelife.co.uk
Company Number: 06097876 | VAT No: GB 873 9895 46
Copyright © 2001-2010 DiveLife | All Rights Reserved
Club
Forum