Sub Aqua Products

1/2" UNF male to 3/8" UNF female adaptor. For use when fitting standard reg hoses to the larger 1/2" UNF port found on some first stages. No suitable for the Mares MR22 1st stage...

150mm mirror gauge for panel mounting. Accuracy to 0.5% RRP £189...

3/8" UNF 90 Degree elbow. Allows a 3/8" UNF hose to exit a 1st stage at 90 degrees to ease hose routing...

3/8" UNF Male to 1/2" UNF Female adaptor. Used for fitting 1/2" UNF reg hoses to standard 3/8" UNF reg port...

7/16" 90 Degree elbow. Allows easier routing of high pressure hoses when leaving the first stage. Can also be used to fit a computer transmitter to first stages such as Poseidon...

Analogue oxygen blending kit. Bullnose to DIN with one way valve. 100% oxygen clean RRP £349...

Din 300 Female to Male Euro Bullnose...

Personal filter and cartridge assembly. Idea for those trips away when you're unsure whether the air station is giving you clean air. A must for all Nitrox divers RRP £120...

Personal filter cartridge for the Verwood Undersea persanl filter RRP £23.50...

Personal filter kit including a cartridge and an assortment of common filling adaptors. Nice presented in its own transit case RRP £275...

Portable digital gas blending kit. 100 O2 compatible. Bullnose to din fittings with one-way valves. RRP £450...

1/4 BSP Male to 3/8 UNF Male...

1/4 BSP Male-1/8 BSP Male Adaptor...

1/4 BSP Male-7/16 UNF Male...

1/4 NPT Blanking Plug...

Usefull panel mount female DIN for safe- clean "docking" of male DIN charging whips or panel mount H.P outlet ( 232bar )....

1/4"Fem -B/Nose Fem Adaptor...

10 Tube Pack Carbon Dioxide (Komyo)...

10 Tube Pack Carbon Monoxide (Komyo)...

10 Tube Pack Oil Mist (Komyo)...

10 Tube Pack Water Vapour (Komyo)...

232 Bar Male Din-M16x1.5mm With Flow Stop...

Enables easy panel decanting from up to three remote 02 storage cylinders when used in conjunction with our Digital Blending panel....

3 Way Adaptor Block- 1/4 Bsp Fem ...

3/8 UNF Male to 1/4 BSP Female ...

3/8 UNF Male-9/16 UNF LP Hose fitting...

300 Din Female- 300 Din Female...

This item enables easy multi-way H.P. plumbing of air & panel systems....

50 Pack Spares Kit O Rings...

Adaptor 1/2 Unf Fem - 3/8 Unf Ml...

Adaptor 1/2 Unf Ml - 3/8 Unf Fem...

Adaptor 1/4 BSP Female-7/16 UNF Male...

A usefull fitting for L.P. connection to D.V. swivel hose ends such as inflation devices , air powered tools etc...

Adaptor 3/8 Unf Ml-1/8 Bsp Posiedon Fem...

Adaptor 7/16 Ml-3/8 Unf Fem...

Adaptor 7/16 Unf Fem - 3/8 Unf Ml...

Adaptor 7/16 Unf Fem - 7/16 Unf Ml...

Converts 1/4"BSP gauges to 1/4" BSP male to fit all of our fittings....

Adaptor Brass 1/4m X 1/4m Bsp...

Breathing air purity test kit-Compact and easily transportable. Tests CO2-CO-Oil mist & Water vapour levels using Kitigawa tube system Complete with yoke & DIN sampling connectors. Supplied with 10 tubes of each test ellement. (Information sheet available upon request )...

The above unit is fitted with 150mm mirror scale gauge 0-400 bar -2 bar increments. Accuracy 0.5% 3 x air storage cascade 1 x compressor inlet 3 x charging outlets( full specification and illustration supplied upon request )...

Fitted with universal pressure & flow regulating adaptor - fits both DIN and Yoke fitting valves. Due to the self regulating function of the adaptor it eliminates the tedious need to accurately set up the pillar valve prior to analysis. Unit comes in a rugged padded transit case. ( Information s...

Blank Plug 1/4" Bsp Male...

Blank Plug X 1/2 Unf...

Blank Plug X 1/8 Bsp...

Blank Plug X 3/8 Unf...

Blank Plug X 7/16 Unf...

Can be fitted to any 1/8" BSP female port to provide a bleed facility....

Bleed Screw...

A compact panel of modular design that is easy to use for the blending of Nitrox. All valves are ournew uprated 6000 Mk2a needle valves which will give you fine control over the flow into and out of this panel. The handwheels are now moulded in rubber to offer better grip & comfort. Each ox...

Note: The bleed screw is not included and must be ordered separately....

Block with 2 x 1/4" Bsp fem in line outlets...

Block with 2 x G 1/4 + 2 x G 1/8...

Note: The bleed screw is not included and must be ordered separately....

Enables 'A' Yoke charging of male threaded AB cylinders....

Bullnose Adaptor -European Configuration...

For bank coupling of storage cylinders 5/8"BSP - 350 bar w.p....

Bullnose Charging Adaptor With Bleed...

Similar to the 5830 panel but for use with air. This panel may be used to control as many storage cylinders as you wish by manifolding them together. Please note that this panel does not have a N.R.V. as it is not normally required. The finished text colour is Blue. Available with aluminium fron...

As the Cascade Panel for Oxygen but finished in Brown plastic with White lettering....

With 3 inlets each controlled by it`s own balanced needle valve which in turn has a 1.6 % accurate 0 - 350 Bar clearscale gauge to give the pressure in the storage cylinder. The single outlet is protected by a N.R.V. This panel may be used with our 5210 / 15 De Canting assembly to give a basic an...

Case Assy for 5200 Digital Decant Assy...

Charging Adaptor with bleed & Gauge...

Charging connection for Int yoke fitting pillar valved cylinders....

Complete Set Air Purity Test Tubes...

Wall mounted mixing panel 3 valved - 2 inlet -1 outlet. Both Air & Oxygen inputs protected by non return valves. See full specification detail and additional option features....

Din 232 Male To 2x Din 232 Female...

Din 232 Male-G1/4 Male With Green Handwheel...

Din 300 Male-16x1.5mm With Flow Stop...

With Green Handwheel and Oxygen Clean. Chromed Brass with G 1/4 Male thread & 60 cone seat....

Din Adaptor To 1/4 Bsp Ml (232 Bar)...

DIN 300 Male connection to G 1/4 Male x 60 cone....

Protects external threads of DIN regulators and fittings from damage and ingress of debris...

Protects valve and threads from the ingress of dust & debris....

Charging connection for 300 bar DIN configuration valved cylinders....

Charging connection for 232 bar DIN Cylinders....

Din Charging Adaptor With Gauge (232bar)...

300Bar charging adaptor with 400Bar guage to G 1/4...

Din Cylinder Decanting Assembly 232 Bar...

Dual purpose fitting enabling thread protection of fem 232 bar DIN connections and high pressure blanking of fem DIN service ports - hence the fitted decompression bleed. ...

232 Bar DIN - Int block fitting - max service pressure 250 Bar. 300 Bar male is illegal....

Enables dual mix filling from a single blending outlet....

The pressure regulator is our 7000 Model. With a maximum inlet pressure of 414 Bar and an outlet pressure adjustable between 0 and 414 Bar.A compact panel that is built around a manifold system for reliability and ease of servicing. All components are sealed with "O" rings for a positive seal. Th...

Female 232 Din-Female 232 Din...

Female 232 Din-Female 300 Din...

Female Din ( 232 bar ) To 1/4 Bsp Female...

Female DIN ( 300 bar ) to 1/4" BSP female...

Female Euro Bullnose To 1/4 BSP Female...

Female Euro Bullnose to G 1/4 Female...

G 3/8 Male to G 1/4 Male in 316 Stainless Steel ...

With 300 bar male Din connector for 300 bar Din cylinder connection....

Outlet machined to accept direct coupling of rechargeable gun cylinder having a 1/4"Bsp outlet valve with O ring seal. Suitable for Theoben - B.S.A. & Stealth systems. Available in Yoke - Din 232 or Din 300bar cylinder connection. Please specify when ordering....

With 232 bar male Din inlet for connection to Din cylinder valve....

A clamp yoke connector - 300 bar gauge & bleed - 1/8 Bsp male outlet for connection to 1/8 common gun fittings or 5040/30 h.p. hose...

1/8" x 1/8" Bsp nutted small bore flexible H.P. hose x 30 c.m Max W.P 230 Bar with a 3:1safety factor...

Max. W.P. 207 Bar for use with booster pumps. 10 Micron Replaceable stainless steel filter. 1/4 NPT Female threads. Pipe sizes also available. Please ask....

10 Micron Filter 1/4 NPT female threads W.P. 414 Bar...

Max W.P. 414 Bar for 6mm Tube. 10 Micron replaceable Stainless Steel filter. Easily replaced without disconnecting from pipe work. Other Microns available to special order. Also available with 1/4 NPT Female threads. Once fitted you do not need to dis-connect to replace filter Element. Just unscr...

IN LINE STAINLESS STEEL "T" FILTER Max W.P. 414 Bar for 6mm Tube. 10 Micron replaceable Stainless Steel filter. Easily replaced without disconnecting from pipe work. Other Microns available to special order. Once fitted you do not need to dis-connect to replace filter Element. Just unscrew the he...

Max W.P. 414 Bar. For 6mm Tube. 10 Micron Replaceable Stainless Steel filter for use with Booster Pumps etc. Also available with 1/4 NPT Female threads & other pipe sizes available....

Int Block & Seat ( For European Din Adaptor)...

Converts male 232 bar DIN to Int yoke charging outlet....

Male M26 - 1/4" Bsp male cone enabling charging NEW Euro Nitrox cylinder valves....

M26 Female To Male 300 Din...

Enables conversion of new euro spec nitrox regulators to be fitted to std DIN valves....

Enables conversion of new euro spec nitrox valves to existing regulators....

Enables filling of 232 Bar DIN cylinders from 300 Bar filling outlet....

Male 300 Din To Female 232 Din...

Swiveling action allows valves & assemblies to be aligned. Not for use on charging hoses...

Din 232 Female to Male G 5/8...

Din 300 Female to Male G5/8 U.K. Bullnose to BS 341 type 3...

Manifold Bar 10"x1" Square. With 7 G1/4 Outlets...

Manifold Bar 420x38x25mm With 8 G1/4 Outlets...

Nevoc W30 x2 Adaptor...

O Rings (10 Pack) 2.62mm X 11mm...

O Rings 2.62mm x 17mm (Bulk Qty 1000)...

O Rings 2.62mm x 18.72mm (Bulk Qty 1000)...

O Rings 2.62mm x 23.5mm (Bulk Qty 1000)...

Provides an inexpensive but accurate facility for partial pressure blending....

Specifically for Oxygen enriched equipment applications....

Padded Case For 5210 Decanting Assembly...

Recommended where mixing in an unventilated area allowing enriched air or oxygen to be discharged via flexible hose to unventilated atmosphere. Note this is a H/O- H.S.S. requirement for instalations used in unventilated areas....

BSP Female for panel mounting....

Panel Mount Ring for 7000 Reducing reg...

This kit enables you to de-cant oxygen with absolute accuracy due to the new DPM 300 Mk4 digital gauge that is fitted to this assembly. You may choose the inlet fitting from our list of oxygen fittings but it is normally supplied with a G5/8 U.K. Bullnose into our new up rated 6000 Mk2 balanced ...

Regulator .Inlet 400 bar.Outlet 50 to 400 bar. Inlet & outlet ports are1/4NPT - adaptors available to suit. May be panel mounted using mounting ring accessory 0750. Construction is of anodised aluminium with stainless steel internal parts. It is self venting and may be panel mounted with the...

As Pressure Reducing Regulator (Air) but for O2 use. Manufactured in brass for use with oxygen. This model can also be used for both air and Helium....

Gives an outlet flow rate of 2 Litres per minute. Used for analysing gases. All chrome plated brass construction. Regret not available for 300 Bar....

Replacement Element For In-Line 'T' Filters...

Replacement Element For In-Line Filters...

Retaining Nut...

Enables upgrade of earlier model " Alpha's " using existing flow meter & cell adaptor May be used with other analysers - consult with us if in doubt....

Service kit for 7000 Reducer reg...

International yoke fitting - 1/4" bsp male cone....

Tee Bolt (For Charging Clamps M10 Thread)...

This is the current version of our Tri -Mix Blending panel for the most discerning operator or diving group. It is a blending panel that is designed to be both functional and easy to use. All inlets are protected by individual one way valves whilst the pure air inlet has twin (2) N.R.V.`s which m...

Not suitable for 'Air Products' or 'Air Liquide/Linde' cylinders...

U.K. Bullnose Adaptor To G1/4 Male Green Handwheel...

for storage cylinder connection 5/8" BSP with O ring seal on the bullnose - 350 bar w.p....

UK Bullnose To 1/4 NPT Male Thread...

The listed decanting assemblies have standard hoses of 50 cm length and are exclusively for AIR use only. Nitrox versions are available upon request using our Oxygen compatible hose. Alternative lengths are available to order in both AIR and O2 stock....

W30 x 2 Nevoc to ISO 5145 Type 31 for Air...

W30 x 2 Nevoc to ISO 5145 Type 32 for Oxygen...

Yoke Decant Assy Fitted Gauge (Nitrox/O2 Use)...