dive_life_logo_bare.png


Mares Heavy Duty Harness With 3mm SS Backplate



£205.00

MARES UK

SS Backplate
One Piece
3mm

Qty

The Mares XR Heavy Duty Complete Mount System combines the pure harness with the 3mm Stainless Steel Backplate.

 

Harness

A single-piece DIR webbing harness for your backplate & wing set-up without any breaks. A single piece of 2" webbing measuring 3.5m long with a centre hole and grommet threads through your backplate to your exact measurements. D-Rings, tri-slides, waist buckle and crotch strap are all included to complete your harness.

 

Backplate

A tough skeleton backplate made to be strong and full of features for a solid foundation for your harness and wing system. 3mm 316 Stainless Steel weighs about 2.5kg to act as trim weight so you can take some lead off your belt.

 

Hogarthian

Keep it simple with a single piece webbing harness with stainless steel parts has no breaks to reduce failure points without any excess parts. Tried and tested DIR setup has been working for years in the exploration community since the 80's.

6 D-Rings, 2 bent rings for your shoulder straps, 2 straight for your waist and 2 straight for your crotch strap.


The Mares XR Heavy Duty Complete Mount System combines the pure harness with the 3mm Stainless Steel Backplate.

 

Harness

A single-piece DIR webbing harness for your backplate & wing set-up without any breaks. A single piece of 2" webbing measuring 3.5m long with a centre hole and grommet threads through your backplate to your exact measurements. D-Rings, tri-slides, waist buckle and crotch strap are all included to complete your harness.

 

Backplate

A tough skeleton backplate made to be strong and full of features for a solid foundation for your harness and wing system. 3mm 316 Stainless Steel weighs about 2.5kg to act as trim weight so you can take some lead off your belt.

 

Hogarthian

Keep it simple with a single piece webbing harness with stainless steel parts has no breaks to reduce failure points without any excess parts. Tried and tested DIR setup has been working for years in the exploration community since the 80's.

6 D-Rings, 2 bent rings for your shoulder straps, 2 straight for your waist and 2 straight for your crotch strap.

Webbing

  • 3.5m webbing with center hole and grommet
  • 3 x 40mm elastic loop retainers
  • 1.5m crotch strap

Harness

  • 2 x bent D-ring 50mm stainless steel
  • 2 x straight D-Ring 50mm stainless steel
  • 4 x 3-bar slides normal stainless steel with Mares logo
  • 2 x 3-bar slides toothed stainless steel with Mares logo
  • 1 x Waist buckle stainless steel with Mares logo

Crotch Strap

  • 2 x straight D-rings 50mm stainless steel
  • 1 x 3-bar glides 50mm stainless steel with Mares logo
  • DIR – Hogarthian configuration

Backplate stainless steel 3mm

Write a review