dive_life_logo_bare.png


Santi Heated Vest



£377.00

SANTI

Qty

The trunk is one of the most important part of diver’s body. The lungs and the heart sit in it. When we feel cold, the heart works faster and the lungs constrict, which significantly affects the quality and safety of diving.

The Santi Heated Vest is designed to be worn between a thin base layer and undersuit. This configuration allows most of the generated heat to be passed directly to the diver’s body and not to the thick undersuit.


TheSanti Heated Vest Santi Heated Vest is perfect for divers who need more insulation than can be provided by 'passive' undersuits. The Santi Heating Vest actually actively helps to keep you warm, it is not designed to warm you up but to limit the rate at which you become cold. As such the heating vest does not feel 'hot' but its effects can be felt.

Limited to a maximum working temperature of 40oC chances of burns from the vest are highly unlikely. At 60 watts of power, the vest requires a battery pack located outside of the suit, a 10 amp hour battery will last for around 1.5-2 hours, while a 20a/hr battery will last 3-4 hours.

The Santi Heated Vest is made from 200gr Thinsulate to provide you with insulation even if the vest inst plugged in. The vest is firmly fitted with elastic on the sides and an elasticated velcro crotch straps to keep the vest exactly in position. The vest is already fitted with a terminated cable but batteries and a through-suit connector must be purchased separately.

Santi Heated Vest Features:

  • A new generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking
  • Innovative, synthetic power wire crust resistant to high temperatures and cuts
  • Power consumption of 55W
  • Run times: Santi 6Ah Battery 1.2-1.5hrs / Santi 24Ah battery 5-6hrs
  • Battery and connector - not included
  • New, more ergonomic nesting and wire layout inside
  • NEW DESIGN, same Thinsulate breathability
  • Special Vest Bag included
  • Batteries and through suit connectors must be purchased separately
  • Use with appropriate battery source only and never over 12V !
  • For available sizes see:  SANTI SIZE CHART


 

 

To operate the Santi Heated Vest following can be purchased separately:
Santi Drysuit Connector

Santi Drysuit Connector - Use existing inlet valve 
Drysuit Inflation valve connector is designed to be used with Santi heating system products. This adapter takes an external standard E/O connector through a standard suit inflation valve and provides power connection to a heated product under the drysuit.

Includes E/O cord to connect to the battery and waterproof plug compatible with Santi heating system products.

  • Works with power supply no higher than 12V.
  • The total length of the cables including plugs – 55 cm.
  • Height without the valve – 19 mm.

 

Santi Thermovalve

Santi Thermovalve - All in one
Two functions in one device: drysuit inflation valve with an integrated 12V connector.

90° moveable valve head for more convenient hose attachment which allows for optimal E/O cord and pressure hose settlement under the drysuit.

Includes E/O cord to connect to the battery and waterproof plug compatible with Santi heating system products.

  • Works with power supply no higher than 12V.
  • The total length of the cables including plugs – 55 cm.
  • Ergonomic design.
  • Includes valvenut.

Write a review